PCB-3713E1125G

PCB-3713E1125G

  • Triaxial MEMS accelerometer,
  • Suitable for measuring static accelerations,
  • Measurement range 25 g,
  • Sensitivity 80 mV / g,
  • Typical frequency range 0 … 1500 Hz,
  • Supply voltage 6 … 30 V DC,
  • 9-pin female connector on the side
  • basic data
    sensitivity (±3%)80 mV / g8.15 mV/(m/s²)[1]
    measuring range±25 g pkpk ±245, 2 m/s²
    Frequency range (± 3 dB)0 … 1500 Hz[2]
    frequency range (± 3 dB)0 … 750 Hz[5]
    Phase error< 10 °
    wide band resolution (0,5 … 100 Hz)[2]0.003 m/s² rmsrms 0.3 mg
    Linearity error≤ 1%[3] [4]
    transverse acceleration sensitivity≤ 5%
    conditions of use
    Overload limit (shock)±5. 000 g pk±49. 050 m / pk
    Temperature range (operation)-65 … 250 ° F-54 … 121 ° C
    temperature range (storage)-65 … 250 ° F-54 … 121 ° C
    Temperature coefficient of sensitivity±3%[6]
    temperature coefficientzero±2% FSO[6] [3]
    strain sensitivity (footprint)0.001 g/µε0.01 (m/s²)/µε[2]
    Magnetic sensitivity100µg/Gs/9.8 (m/s²) / T[2]
    technical specifications
    power supply6 … 30 V DC
    Power≤ 30 mA
    output impedance≤ 120 Ω
    Spannungsoffset±80 mV DC[7]
    spectral noise (1 … 100 Hz)100 µg / √ Hz981 (µm / s ²) ) / √ Hz[2]
    electrical insulation (base)≥ 100 MΩ
    physical properties
    housing materialtitanium
    Sealinghermetically sealed
    size - length0.85 in21.6 mm
    Gr size - width0.85in21.6 mm
    size - height0.85 in21.6 mm
    weight0.8 oz22.7 grams
    Electrical connector9-Pin
    Connectionon the side
    mounting thread10-32 female
    notes
    [1]measured @ 100 Hz
    [2]typically
    [3]FSO = "Full Scale Output": maximum output (4 V measuring range ( DC).
    [4]zero-based balancing line, determined using the method of least squares
    [5]guaranteed; through supplied with Calibration certificate is
    [6]-54 … 121 ° C, reference 24 ° C
    [7]offset at 3 meters cable length (type 037)
    [8]details: see PCB Declarationof conformance PS027
    equipment
    080A12adhesive mounting-1
    081 B 05Mounting bolts, 10-32 on 10-32-1
    M081B05mounting bolts, 10-32 to M6 x 0.75-1
    ACS-145 Tcalibration of amplitude and phase response from 2 Hz to the upper ±3dB point (750 Hz)-1

    14 other articles of the same category: