PCB-3713E1150G
    zoom_out_map

      PCB-3713E1150G

    • Triaxial MEMS accelerometer,
    • Suitable for measuring static accelerations,
    • Measurement range 50 g,
    • Sensitivity 40 mV / g,
    • Typical frequency range 0 … 2,000 Hz,
    • Supply voltage 6 … 30 V DC,
    • 9-pin female connector on the side
    • basic data
      sensitivity (±3%)40 mV / g4.1 mV/(m/s²)[1]
       
      range±490, 5 m/s² pk±50 g pk 
       
      Frequency range (± 3 dB)0 … 2,000 Hz [2]
       
      frequency range (± 3 dB)0 … 1,000 Hz [4]
       
      Phase error< 10 °  
       
      wide band resolution (0,5 … 100 Hz)[2]0.010 m/s² rmsrms 1.0 mg
       
      Linearity error≤1% [3]
       
      transverse acceleration sensitivity≤5%  
      conditions of use
      Overload limit (shock)±5. 000 g pk±49. 050 m/s² pk 
       
      temperature range (operation)-65 … 250 ° F-54 … 121 ° C 
       
      temperature range (storage)-65 … 250 ° F-54 … 121 ° C 
       
      Temperature coefficient of sensitivity±3% [5]
       
      temperature coefficientzero±2% FSO [5] [6]
       
      strain sensitivity (footprint)0.001 g/µε0.01 (m/s²)/µε[2]
       
      Magnetic sensitivity100µg/Gs/9.8 (m/s²) / T[2]
      technical specifications
      power supply6 … 30 V DC  
       
      Power? 30 mA  
       
      output impedance? 120 ?  
       
      Spannungsoffset±80 mV DC [7]
       
      spectral noise (1 … 100 Hz)200 µg / √Hz1,962 (µm / s ²) / √Hz[2]
       
      electrical insulation (base)>100 MΩ  
      physical properties
      housing materialtitanium  
       
      Sealinghermetically sealed  
       
      size - length0.85 in21.6 mm 
       
      Size - width0.85in21.6 mm 
       
      size - height0.85 in21.6 mm 
       
      weight0.8 oz22.7 grams 
       
      Electrical connector9-Pin  
       
      Connectionon the side  
       
      mounting thread10-32 female  
      notes
      [1]measured @ 100 Hz  
       
      [2]typically  
       
      [3]zero-based balancing line, determined using the method of least squares  
       
      [4]calibration certificate supplied with is guaranteed;  
       
      [5]-54 … 121 ° C, reference 24 ° C  
       
      [6]FSO = "Full Scale Output": maximum output signal of the measuring range (4 V DC).  
       
      [7]offset at 3 meters cable length (type 037)  
       
      [8]details: see PCB Declarationof conformance PS027  
      equipment
      080A12adhesive mounting-1 
       
      081 B 05Mounting bolts, 10-32 on 10-32-1 
       
      M081B05mounting bolts, 10-32 to M6 x 0.75-1 
       
      ACS-145 Tcalibration of amplitude and phase response from 2 Hz to the upper ±3dB point (1,000 Hz)-1 
      PCB-3713E1150G

      Specific References

      Download

      3713E1150G_drawing.PDF

      Technical drawing

      Download (1.09M)

      3713E1150G_manual.PDF

      Operating instructions

      Download (1.39M)

      3713E1150G_specs.PDF

      Technical data sheet

      Download (80.4k)