PCB-3711E112G

PCB-3711E112G

  • MEMS-DC acceleration sensor,
  • Suitable for measuring static accelerations,
  • Measurement range 2 g,
  • Sensitivity 1,000 mV / g,
  • Typical frequency range 0 … 400 Hz,
  • Supply voltage 6 … 30 V DC,
  • 4-pin female connector on the side
  • basic data
    sensitivity (±3%)1,000 mV / g101.9 mV/(m/s²) 
     
    measuring range±2 g pkpk ±19, 6 m/s² 
     
    Frequency range (± 3 dB)0 … 400 Hz [2]
     
    frequency range (± 3 dB)0 …200 Hz [3]
     
    Phase response< 2,5 °  
     
    wide band resolution (0,5 … 100 Hz)[2]0.001 m/s² rmsrms 0.1 mg
     
    Linearity error≤1% [1]
     
    transverse acceleration sensitivity≤5%  
    conditions
    Overload limit (Shock)±2. 000 g pk±19. 620 m / pk 
     
    Temperature range (operation)-65 … 250 ° F-54 … 121 ° C 
     
    temperature range (storage)-65 … 250 ° F-54 … 121 ° C 
     
    Temperature coefficient of sensitivity≤5% [4]
     
    temperature coefficientzero±4% FSO [4] [5]
     
    strain sensitivity (footprint)0.0002 g/µε0.002 (m/s²)/µε[2]
     
    Magnetic sensitivity100µg/Gs/9.8 (m/s²) / T[2]
    technical specifications
    power supply6 … 30 V DC  
     
    Power? 10 mA  
     
    output impedance? 120 ?  
     
    Spannungsoffset±160 mV DC [6]
     
    spectral noise (1 … 100 Hz)15 µg / √Hz147 (µm / s ²) ) / ? Hz[2]
     
    electrical insulation (base)>100 MΩ  
    physical properties
    housing materialtitanium  
     
    Sealinghermetically sealed  
     
    size - height0.45 in11.4 mm 
     
    Gr öße - L &AmericanCatholic.org; length0.85 in21.6 mm 
     
    size - width0.85 in21.6 mm 
     
    mass0.58 oz16.3 grams 
     
    Electrical connection4-Pin  
     
    connectionon the side  
     
    mountingtwo through holes  
    Notes
    [1]zero-based balancing line, determined using the method of least squares  
     
    [2]typically  
     
    [3]guaranteed; evidenced by calibration certificate supplied with  
     
    [4]-54 … 121 ° C, reference 24 ° C  
     
    [5]FSO = "Full Scale Output": maximum output signal of the measuring range (4 V DC).  
     
    [6]offset at 3 meters cable length (type 010)  
     
    [7]details: see PCB Declaration of Conformance PS027  
    Accessories supplied
    080A152mounting clip-1 
     
    081A113mounting screw with 4-40 thread2 
     
    M081A113mounting screw m2, 5 thread2 
     
    ACS-145Calibration of amplitude and phase of 2 Hz up to the upper ±3dB point ?200 ?z)-1 

    19 other articles of the same category: