PCB-3711E1110G

PCB-3711E1110G

  • MEMS-DC acceleration sensor,
  • Suitable for measuring static accelerations,
  • Measuring range 10 g,
  • Sensitivity200 mV / g,
  • Typical frequency range 0 … 1,000 Hz,
  • Supply voltage 6 … 30 V DC,
  • 4-pin female connector on the side
  • basic data
    sensitivity (±5%)200 mV / g20.4 mV/(m/s²)
    measuring range± 10 g±98, 1 m/s² pk
    Frequency range (± 3 dB)0 … 1,000 Hz[2]
    frequency range (± 3 dB)0 … 500 Hz[3]
    Phase response< 10 °
    wide band resolution (0,5 … 100 Hz)[2]0.002 m/s² rmsrms 0.2 mg
    Linearity error≤ 1%[1]
    transverse acceleration sensitivity≤ 5%
    conditions
    Overload limit (Shock)±5. 000 g pk±49. 050 m / pk
    Temperature range (operation)-65 … 250 ° F-54 … 121 ° C
    temperature range (storage)-65 … 250 ° F-54 … 121 ° C
    Temperature coefficient of sensitivity±3%[4]
    temperature coefficientzero±2% FSO[4] [5]
    strain sensitivity (footprint)0.0004 g/µε0.004 (m/s²)/µε[2]
    Magnetic sensitivity100µg/Gs/9.8 (m/s²) / T[2]
    technical specifications
    power supply6 … 30 V DC
    Power≤ 10 mA
    output impedance≤ 120 Ω
    Spannungsoffset±80 mV DC[6]
    spectral noise (1 … 100 Hz)45 µg / √ Hz441 (µm / s ²) / √ Hz[2]
    electrical insulation (base)≥ 100 MΩ
    physical properties
    housing materialtitanium
    Sealinghermetically sealed
    size - height0.45 in11.4 mm
    Gr öße - length0.85in21.6 mm
    size - width0.85 in21.6 mm
    mass0.58 oz16.3 grams
    Electrical connection4-Pin
    Connectionon the side
    mountingtwo mounting holes
    notes
    [1]zero-based balancing line, determined using the method of least squares
    [2]typically
    [3]guaranteed; evidenced by calibration certificate supplied with
    [4]-54 … 121 ° C, reference 24 ° C
    [5]FSO = "Full Scale Output": maximum output (4 V measuring range ( DC).
    [6]offset at 3 meters cable length (type 010)
    [7]details: see PCB Declaration of Conformance PS027
    IncludedAccessories
    080A152mounting clip-1
    081A113mounting screw with 4-40 thread2
    M081A113Mounting screw m2, 5 thread2
    ACS-145calibration of amplitude and phase of 2 Hz up to the upper ±3dB point (500 Hz)-1

    19 other articles of the same category: