PCB-(M)204C
    zoom_out_map

      PCB-(M)204C

    • ICP® power measurement washer,
    • Measuring range 178 kN,
    • Sensitivity 27 mV / kN,
    • Frequency range 0.0003 … 55,000 Hz,
    • 10-32 female connector on the side
    •  

      basic data
      sensitivity (±15%)

      0.12 mV / lb

      27 mV / kN 
       
      measuring range (pressure)40,000 lb177.92 kN 
       
      Maximum permissible static load (force)50,000 lb222.4 kN 
       
      wide band resolution0.80 lb RMS3.6 N RMS[1]
       
      Lower limiting frequency (-5%)0.0003 Hz [2]
       
      upper frequency limit55,000 Hz [4]
       
      linearity error≤ 1.5% FS [3]
      conditions
      temperature range-65 … 250 ° F-54 … 121 ° C 
       
      Temperature coefficient of sensitivity≤ 0.08 %/°F≤ 0.04 %/°C 
      technical properties
      discharge charge time constant (at room temperature) ≥ 2,000 s  
       
      Supply20 … 30 V DC  
       
      constant power supply2 … 20 mA  
       
      output impedance≤100 Ω  
       
      Bias voltage8 … 14 V DC  
       
      Spectral noise (1 Hz)0.088 lb / √Hz0.39 N / √Hz[1]
       
      spectral noise (10 Hz)0.025 lb / √Hz0.11 N / √Hz[1]
       
      spectral noise (100 Hz)0,0060 lb / √Hz0,0266 N / √Hz[1]
       
      spectral noise (1,000 Hz)0.0016 lb / √Hz0,00719 N / √Hz[1]
       
      (pressure) output polaritypositive  
      physical properties
      preload8,000 lb35,585 kN 
       
      stiffness29 lb/µin5 kN/µm[1]
       
      size - diameter1.34 in34 mm 
       
      Size - height0.47 in12 mm 
       
      size - inner diameter (hole diameter)0,660 in16.76 mm 
       
      Size - diameter of the measuring surface1.10 in28 mm 
       
      mass2.0 oz57 g 
       
      housing materialStainless steel  
       
      sealinghermetically sealed  
       
      electrical connection10-32-coaxial socket  
       
      Connection positionside  
      notes
      [1]typically  
       
      [2]based on the Calculated discharge charge time constant  
       
      [3]zero-based balancing line, determined using the method of least squares  
       
      [4]Accepted value determined on the basis of solid state Dynamics calculations  
       
      [5]details: see PCBs Declaration of conformance PS023  
      included Accessories
      080A82grease-1 
       
      081A14mounting bolts, 1/2 "-20 x 1,400", BeCu-1 
       
      082 B 04Washer (for models 204 C and 214 B)-1 
       
      083 B 04mounting sleeve (for the models 204 C and 214 B)-1 
      (M) metric mounting
      equipment   
       
      M081A14mounting Stud, M14 x 1.25 x 1,400 ", BeCu-1 
       
      M083B04mounting sleeve-1 
      (N) negative Output polarity
          
      (W) waterproof cable connection
      electrical connectionsealed cable connection  
       
      Cable exitside  
      PCB-(M)204C

      Specific References

      Download

      204C_drawing.PDF

      Technical drawing

      Download (70.3k)

      204C_manual.PDF

      Operating instructions

      Download (932.91k)

      204C_specs.PDF

      Technical data sheet

      Download (75.74k)