PCB-208C05

PCB-208C05

  • Universally applicable ICP® power sensor,
  • Range 2,224 … 22,240 N,
  • Sensitivity 225 mV / kN,
  • Frequency range 0.01 … 36,000 Hz,
  • 10-32 female connector on the side
  • basic data
    sensitivity (±15%)1 mV / lb224,82 mV / kN
    measuring range (pressure)5,000 lb22.24 kN
    Measuring range (traction)500 lb2,224 kN
    maximum permissible static load (force)8,000 lb35,59 kN
    maximum static force (traction)500 lb2,224 kN
    wide band resolution0.05 lb RMS0,222 N RMS[1]
    Lower limiting frequency (-5%)0.0003 Hz[3]
    upper limit frequency36,000 Hz[4]
    linearity error≤ 1% FS[2]
    conditions
    temperature range-65 … 250 ° F-54 … 121 ° C
    temperature coefficient Temperature coefficient of sensitivity≤0,05 %/°F≤0.09 %/°C
    technical properties
    discharge charge time constant (at room temperature)≥ 2,000 s
    Supply20 … 30 V DC
    constant power supply2 … 20 mA
    Output impedance≤ 100 Ω
    Bias voltage8 … 14 V DC
    Spectral noise (1 Hz)0,00168 lb / √ Hz0,00750 N / √ Hz[1]
    spectral noise (10 Hz)0,00112 lb / √ Hz0,00501 N / √ Hz[1]
    spectral noise (100 Hz)0,000459 lb / √ Hz0,00205 N / √ Hz[1]
    spectral noise (1,000 Hz)0,000133 lb / √ Hz0,000592 N / √ Hz[1]
    (Pressure) output polaritypositive
    physical properties
    rigidity6 lb/µin1.05 kN/µm[1]
    Size - hex0.625 in15.88 mm
    size - height0.625 in15.88 mm
    Size - diameter of the measuring surface0.500 in12.7 mm
    dimensions0.80 oz22.7 grams
    parts usematerialstainless steel
    sealinghermetically sealed
    electrical connection10-32-coaxial socket
    Connection positionside
    mounting thread10-32 tappedno equivalent
    Mounting torque (recommended)16 … 20 in-lb181 … 226 NCM
    notes
    [1]typically
    [2] Zero-balance just, determined using the method of least squares
    [3]calculated on the basis of discharging charging time constant
    [4]Accepted value determined on the basis of solid state Dynamics calculations
    [5]details: see PCBs Declaration of conformance PS023
    equipment
    080A81adhesivefor thread safety-1
    081 B 05mounting bolts (10-32 on 10-32)2
    084A03 Premium cap-1
    M081A62mounting bolts, 10-32 to M6 x 1, BeCu, with shoulder2
    (N) negative Ausgangspolarit ät
    (W) waterproof cable connection

    5 other articles of the same category: