PCB-208C03

PCB-208C03

  • Universally applicable ICP® power sensor,
  • Measuring range 2.224 N,
  • Sensitivity 2.25 mV / N,
  • Frequency range 0.0003 … 36,000 Hz,
  • 10-32 female connector on the side
  • ,
    basic data
    sensitivity (±15%)10 mV / lb2.248 mV / kN
    measuring range (pressure)500 lb2,224 kN
    Measuring range (traction)500 lb2,224 kN
    maximum permissible static load (force)3,000 lb13.5 kN
    maximum static force (traction)500 lb2,224 kN
    wide band resolution0.005 lb RMS0.02 N RMS[2]
    Lower limiting frequency (-5%)0.0003 Hz[3]
    upper limit frequency36,000 Hz[4]
    linearity error≤ 1% FS[1]
    conditions
    temperature range-65 … 250 ° F-54 … 121 ° C
    temperature coefficient Temperature coefficient of sensitivity≤0,05 %/°F≤0.09 %/°C
    technical properties
    discharge charge time constant (at room temperature)≥ 2,000 s
    Supply20 … 30 V DC
    constant power supply2 … 20 mA
    Output impedance≤ 100 Ω
    Bias voltage8 … 14 V DC
    Spectral noise (1 Hz)0,000211 lb / √ Hz0,000942 N / √ Hz[2]
    spectral noise (10 Hz)0,000109 lb / √ Hz0.000488 N /. √ Hz[2]
    spectral noise (100 Hz)0,0000387 lb / √ Hz0,000173 N / √ Hz[2]
    spectral noise (1,000 Hz)0,00000863 lb /. √ Hz0,0000385 N / √ Hz[2]
    (pressure) output polaritypositive
    physical properties
    stiffness6 lb/µin1.05 kN/µm[2]
    size - hex0.625 in15.88 mm
    size - height0.625 in 15.88 mm
    Size - diameter of the measuring surface0.500 in12.7 mm
    dimensions0.80 oz22.7 grams
    parts usematerialstainless steel
    sealinghermetically sealed
    electrical connection10-32-coaxial socket
    Connection positionside
    mounting thread10-32 female thread
    Assembly torque ( recommended)16 … 20 in-lb181 … 226 NCM
    notes
    [1]zero-based balancing line, determined using the method of least squares
    [2]typically
    [3]calculated on the basis of discharging charging time constant
    [4]for example, value determined on the basis of solid state Dynamics calculations
    [5]details: see PCBs Declaration of conformance PS023
    Accessories
    080A81Adhesive for thread lock-1
    081 B 05mounting bolts (10-32 on 10-32)2
    084A03Impact cap-1
    M081A62mounting bolts, 10-32 to M6 x 1, BeCu, with shoulder2
    (S) negative output polarity
    (W) waterproof cable connection
    electrical connectionsealed cable connection
    connection position Side

    5 other articles of the same category: