PCB-208C01

PCB-208C01

  • Universally applicable ICP® power sensor,
  • Measuring range 44.5 N,
  • Sensitivity 112 mV / N,
  • Frequency range 0.01 … 36,000 Hz,
  • 10-32 female connector on the side
  • basic data
    sensitivity (±15%)/500 mV / lb112.410 mV / kN
    measuring range (pressure)10 lb0,04448 kN
    Measuring range (traction)10 lb0,04448 kN
    maximum permissible static load (force)60 lb0.27 kN
    maximum static force (traction)60 lb0.27 kN
    wide band resolution0.0001 lb RMS0,00045 N RMS[1]
    Lower limiting frequency (-5%)0.01 Hz[2]
    upper limit frequency36,000 Hz[4]
    linearity error≤ 1% FS[3]
    conditions
    temperature range-65 … 250 ° F-54 … 121 ° C
    temperature coefficient Temperature coefficient of sensitivity≤0,05 %/°F≤0.09 %/°C
    technical properties
    discharge charge time constant (at room temperature)≥ 50 s
    Power18 … 30 V DC
    constant power supply2 … 20 mA
    Output impedance≤ 100 Ω
    Bias voltage8 … 12 V DC[5]
    Spectral noise (1 Hz)0,0000126 lb / √ Hz0,0000562 N / √ Hz[1]
    spectral noise (10 Hz)0,00000424 lb / √ Hz0,0000189 N / √ Hz[1]
    spectral noise (100 Hz)0,00000149 lb / √ Hz0,00000665 N / √ Hz[1]
    spectral noise (1,000 Hz)0,000000522 lb / √ Hz0,00000233 N / √ Hz[1]
    (pressure) output polaritypositive
    physical properties
    stiffness6 lb/µin1.05 kN/µm[1]
    Size - hex0.625 in15.88 mm
    size - height0.625 in15.88 mm
    Size - diameter of the measuring surface0.500 in12.7 mm
    dimensions0.80 oz22.7 grams
    Housing materialstainless steel
    sealinghermetically sealed
    electrical connection10-32-coaxial socket
    Connection positionside
    mounting thread10-32 female thread
    Mounting torque (recommended)16 … 20 in-lb181 … 226 NCM
    notes
    [1]typically
    [2]on base calculates the discharge load time constant
    [3]zero-based balancing line, determined using the method of least squares
    [4] Accepted value determined on the basis of solid state Dynamics calculations
    [5]the sensor contains a protected amplifier electronics, so a relatively long Time possible is.
    [6]details: see PCBs Declaration of conformance PS023
    equipment
    080A81adhesive for thread lock-1
    081 B 05mounting bolts (10-32 on 10-32)2
    084A03premium cap-1
    M081A62mounting bolts, 10-32 to M6 x 1, BeCu, with shoulder2
    (S) negative output polarity
    (W) waterproof cable connection

    5 other articles of the same category: