PCB-111A24

PCB-111A24

  • ICP® pressure sensor with INVAR-membrane,
  • beschleunigungskompensiert,
  • Measuring range 6.895 kPa,
  • Sensitivity 0.73 mV / kPa,
  • Lower limiting frequency 0.005 Hz,
  • 10-32 female connector
  • of

    basic data
    measuring range (±5 V output range)1,000 psi6.895 kPa 
     
    usable range (output range ±10 V)2,000 psi13.790 kPa[2]
     
    sensitivity (±0, 5 mV / psi)5.0 mV / psi0.73 mV / kPa 
     
    maximum static pressure10,000 psikPa 68.950 
     
    resolution0,02 psi0.14 kPa 
     
    resonance frequency≥400,000 Hz  
     
    Rise time (reflected pressure)≤ 1.5 µs  
     
    lower limiting frequency (-5%)0.005 Hz  
     
    linearity error≤2.0% FS [1]
    conditions
    acceleration sensitivity≤ 0.002 psi/g>0,0014 kPa/(m/s²) 
     
    temperature range ( Operation)-100 … 275 ° F-73 … 135 ° C 
     
    Temperature coefficient of sensitivity≤0,2 %/°F≤0.06 %/°C 
     
    maximum temperature shock(for fraction of a second)3,000 ° F1.649 ° C 
     
    Maximum acceleration2,000 g pk19.614 m/s² pk 
     
    Maximum shock resistance20,000 g pk196.140 m/s² pk 
    technical Properties
    output polarity (positive pressure)positive  
     
    discharging charging time constant (at room temperature)≤100 Ω  
     
    Supply20 … 30 V DC  
     
    constant power supply2 … 20 mA  
     
    Output impedance≤100 Ω  
     
    Bias voltage8 … 14 V DC  
    Physical properties
    Geometry of the sensor elementcompression principle  
     
    Sensor elementquartz  
     
    Housing material17-4 (Stainless steel)  
     
    membraneINVAR  
     
    waterproofingepoxy resin  
     
    Electrical connection10-32-coaxial socket  
     
    weight0.21 oz6 g 
    notes
    [1 ]zero-based balancing line, determined using the method of least squares  
     
    [2]for output range up to 10 V, the supply voltage must at least 24 V DC is. At low bias voltage of the sensor, no negative output range is usable up to-10 V.  
     
    [3]details: see PCBs Declaration of conformance PS023  
    equipment
    060A03installation sleeve, 5 /. 16-24-2A thread, 1/4 "hex, (stainless steel)-1 
     
    060A05installation sleeve, M7 x 0.75-6 g-thread-1 
     
    065A02sealing ring f for flush mounting, 0,248 "outside x 0.219" x 0.015 "tall, brass3 
     
    065A05gasket spacer, 0,248 "outside x 0,221" x 0.240 "high, 17-4 (Stainless steel)-1 
    (S) Emralon coating
    coatingEmralon  
     
    electrical insulation>100 MΩ  
     
    equipment   
     
    065A22seal, 0.250 "x outside 0,218" x 0.015 "high, Torlon or Vespel3 
     
    065A08insulation ring, 0.250 "x outside 0,218" x 0.027 "high, anodized aluminium3 
    (S) stainless steel diaphragm
    membrane316 L ( Stainless steel)  

    8 other articles of the same category: