PCB-301A10

PCB-301A10

  • ICP® calibration reference vibration sensor,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range: 0.5 … 10,000 Hz,
  • 1/4 "-28 internal thread above,
  • 1/4 "-28 internal thread below,
  • 10-32 female connector on the side
  • "
    basic data
    sensitivity (±2. 0%)100 mV/g10.2 mV/(m/s²)
    range±50 g pk ±490 m/s 2 pk
    frequency range (±5%)0.5 … 10,000 Hz
    Frequency range (± 10%)0.3 … 14,000 Hz
    frequency range (± 3 dB)0.2 … 20,000 Hz
    Resonance frequency≥ 35,000 Hz
    wide band resolution0.004 g RMS0.039 m/s² RMS[2]
    Linearity≤ 1%[1]
    transverse acceleration sensitivity≤ 3%
    conditions of use
    Overload limit±5. 000 g pk±49. 050 m/s² pk
    Temperature range-65… 250 ° F-54 … 121 ° C
    specifications
    power supply23 … 30 V DC
    Constant power supply2 … 20 mA
    output impedance< 100 Ω
    bias voltage11 … 17 V DC
    discharging charging time constant2.0 … 5.0 s
    Settling time < br(auf Bias-Spannung ±10 %)< 12.0 s
    spectral noise (10 Hz)65 µg / √ Hz638 (µm / s ²) / √ Hz[2]
    Spectral noise (100 Hz)20 µg / √ Hz196 (µm / s ²) / √ Hz[2]
    spectral noise (1,000 Hz)15 µg / √ Hz147 (µ m/s²) / √ Hz[2]
    physical properties
    size - height1 ½ in38.1 mm
    size - hex1 3 / 16 in30.2 mm
    Dimensions6.2 oz176 grams[2]
    sensor elementquartz
    geometry of the sensor element Shear principle
    housing material316 L (stainless steel)
    sealinghermetically sealed welded
    Electrical connection10-32-coaxial socket
    connection positionside
    mounting thread ( Mounting on Shaker)1/4 "-28 female
    mounting thread (Assembly of the DUT)1/4"-28 female
    notes
    [1]zero-based balancing line, determined using the method of least squares
    [2]typically
    [3]details: see PCBs Declaration of conformance PS023
    Accessories
    081A08mounting bolts (10-32 to 1/4 "28)2
    081 B 20mounting bolts, with shoulder(1/4 "28 1/4"-28)2
    ACS-1frequency response, traceable to NIST (10 Hz up to the upper 5% point)-1
    ACS-4 Low frequency calibration (phase and amplitude) of 0.5 … 10 Hz-1
    M081B20mounting bolts 1/4 "28 M6 x 0.752
    (M) metric montage

    5 other articles of the same category: