PCB-(M)103B01
| basic data | |||
| measuring range | 3.00 psi | 180.3 dB | |
| usable range | 6.00 psi | 186.3 dB | [1] |
| Sensitivity (±15%) | 1,500 mV / psi | 217.5 mV / kPa | |
| maximum pressure | 250 psi | 1.724 kPa | |
| resolution | psi 0.00002 | 77 dB | |
| resonance frequency | ≥ 13,000 Hz | ||
| rise time | ≤ 25 µs | ||
| Lower limiting frequency (-5%) | 5 Hz | ||
| linearity | ≤2.0% FS | [2] | |
| conditions | |||
| Acceleration sensitivity | ? 0.0005 psi/g | ? 0.0035 kPa/(m/s²) | |
| temperature range (operation) | -100 … 250 ° F | -73 … 121 ° C | |
| Temperature coefficient of sensitivity | ≤0,2 %/°F | ≤0.06 %/°C | |
| maximum shock (for fraction of a second) | 1,000 ° F | 538 ° C | |
| Maximum shock resistance | 1,000 g pk | 9.807 m/s² pk | |
| Technical properties | |||
| discharge charge time constant (at room temperature) | ? 0,1 s | ||
| supply | 20 … 30 V DC | ||
| Constant power supply | 2 … 20 mA | ||
| output impedance | ≤100 Ω | ||
| Bias voltage | 7 … 13 V DC | ||
| Physical properties | |||
| sensor element | ceramic | ||
| housing material | stainless steel | ||
| Diaphragm | 316 L (stainless steel) | ||
| waterproofing | epoxy resin | ||
| electrical connection | integrated cable | ||
| Cable termination | tinned ends | ||
| mass | 0.115 oz | 3,260 grams | |
| Type of cable | stranded wires, 32 AWG | ||
| cable | 15 in | 38.1 cm | |
| notes | |||
| [1] | for a Output range up to 10 V, the supply voltage must be at least 24 V DC. At low bias voltage of the sensor, no negative output range is usable up to-10 V. | ||
| [2] | zero-based balancing line, determined using the method of least squares | ||
| equipment | |||
| 061A04 | clamp | 2 | |
| 065A66 | adhesive mounting ring | -3 | |
| (M) metric mounting | |||
| equipment | |||
| M061A04 | Terminal | -2 |
PCB-(M)103B01
