PCB-054214-01114
    zoom_out_map

      PCB-054214-01114

      • DMS miniature measuring washer
        for the measurement of static forces,
      • Screw diameter 14 mm,.
      • Measurement range ≥ 10 kΩ,
      • Nominal 1.5 mV / V,.
      • Integrated cable, length 1.5 m,
        ending on open ends

       

      basic data
      measurement range24.730 lb≥10 kΩ[2]
       
      factor1,50 mV / V [1] [2]
       
      Linearitä avoidable±5% FS [1]
       
      hysteresis±5% FS [1]
       
      repeatability±2% FS [1]
       
      Resonance frequency10,000 Hz  
      conditions of use
      Overload limit37.095 lb165 kN 
       
      Temperature range (operation)0 …200 °F18 … 93 ° C 
       
      Temperature range (offset)not specified  
       
      influence of temperature on the output signal (maximum)±0, 02% of measured value / ° F±0. 036% of reading / ° C[3]
       
      temperature influence on (max) zero signaldeviation/±0, 02% FS / °F/±0, 036% FS / ° C[1]
      technical Properties
      Bridge resistance350Ω [2]
       
      supply voltage (recommended)10 V DC [4]
       
      output polaritypositive  
      physical properties
      size - diameter1,213 in30,81 mm 
       
      Size - height0.495 in12.57 mm 
       
      screw diameter0,551 in14.00 mm 
       
      Through hole diameter0.557 in14.16 mm 
       
      sensor elementstrain  
       
      wiringTinned ends  
       
      cable exitside  
      notes
      [1]FS = "Full Scale": full scale  
       
      [2]nominal  
       
      [3]over the compensated temperature range  
       
      [4]calibrated 10 v DC supply voltage; Power supply with 5 … 20 V DC or V AC RMS possible  
      PCB-054214-01114

      Specific References

      Download

      0542xx-01xxx_drawing.pdf

      Technical drawing

      Download (466.12k)

      054214-01114_manual.pdf

      Operating instructions

      Download (774.75k)

      054214-01114_specs.pdf

      Technical data sheet

      Download (13.46k)