PCB-(M)102B

PCB-(M)102B

  • ICP® pressure sensor with INVAR-membrane,
  • Masseisoliert,
  • Beschleunigungskompensiert,
  • Measuring range 34,500 kPa,
  • Sensitivity 0.15 mV / kPa,
  • Lower limiting frequency 0.001 Hz,
  • 10-32 female connector
  •  

    basic data
    measuring range (±5 V output range)5,000 psi34,500 kPa 
     
    usable range (output range ±10 V)10,000 psi69,000 kPa[3]
     
    sensitivity (±10%)1.0 mV / psi0.15 mV / kPa 
     
    maximum static pressure15,000 psi103,000 kPa 
     
    Resolution20 mpsi0.14 kPa[1]
     
    resonance frequency≥ 500, 000 Hz  
     
    Rise time (reflected pressure)≤ 1.0 µs  
     
    lower limiting frequency (-5%)0.001 Hz  
     
    linearity error≤1.0% FS [2]
    conditions
    acceleration sensitivity≤ 0.002 psi/g≤ 0,0014 kPa/(m/s²) 
     
    temperature range ( Operation)-100 … 275 ° F-73 … 135 ° C 
     
    Temperature coefficient of sensitivity≤ 0.03 %/°F≤ 0,054 %/°C[1]
     
    maximum temperature shock(for fraction of a second)3,000 ° F1,650 ° C 
     
    Maximum shock resistance20,000 g pk196,000 m/s² pk 
    Technical characteristics
    Output polarity (positive pressure)positive  
     
    Discharging charging time constant (at room temperature)≥ 500 s  
     
    supply20 … 30 V DC  
     
    Constant power supply2 … 20 mA  
     
    output impedance≤100 Ω  
     
    Bias voltage8 … 14 V DC  
     
    electrical insulation100 MΩ 
    -physical Properties
    geometry of the sensor elementcompression principle  
     
    sensor elementquartz  
     
    parts usematerialstainless steel  
     
    membraneINVAR  
     
    sealedsealeddensely welded  
     
    electrical connection10-32-coaxial socket  
     
    mass0.44 oz12.5 grams 
    Notes
    [1]typically  
     
    [2]zero-based balancing line, determined using the method of least squares  
     
    [3]for output range up to 10 V, the supply voltage must be at least 24 V DC. At low bias voltage of the sensor, no negative output range is usable up to-10 V.  
     
    [4]details: see PCBs Declaration of conformance PS023  
    equipment
    065A03sealing ring, 0.435 "au need x 0,377 "x 0.030" high brass3 
    (M) metric mounting
    equipment   
     
    065A40Seal ring, 0.435 "outside x 0,397" x 0.030 "high brass-1 
    (S) stainless steel diaphragm
        

    5 other articles of the same category: