PCB-EX(M)607A61

PCB-EX(M)607A61

  • Industrial ICP® vibration sensor,
  • With ATEX / CSA approval,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.5 … 10,000 Hz,
  • One-point calibration at 100 Hz,
  • Free ausrichtbares integrated connecting cable with reinforcement, length 3 m,
    ending on cut end
  • "
    basic data
    sensitivity (±15%)100 mV/g10.2 mV/(m/s²)[1]
    measuring range±50 g±490 m / s²
    Frequency range (± 3 dB)30 … 600,000 cpm0.5 … 10,000 Hz
    resonance frequency1,500 kcpm25,000 Hz[2]
    Wide band resolution350 µg3.434 µm / s ²[2]
    linearity≤1%[3]
    Lateral acceleration sensitivity≤ 7%
    Conditions of use
    Overload limit (shock)5,000 g pk49,050 m/s² pk
    Temperature range-65 … 250 ° F-54 … 121 ° C
    protection classIP67
    approval for potentially explosive atmospheresCL I, div 2, groups A, B, C, D
    ExnL IIC T4, AExnA IIC T4
    approval for hazardousAtmospheresEEx nL IIC T4,-40 ° C ≤ Ta ≤ 121 ° C, II 3 G
    approval for use in potentially explosive atmospheresEEx nL IIC T4,-40 ° C ≤ Ta ≤ 121 ° C, II 1 G
    Approval for use in potentially explosive atmospheresCL I, div I, groups A, B, C, D CL
    II, div I, groups E, F, G Cl
    III, div I
    registration for use in potentially explosive atmospheresExIA IIC T4, AExia IIC, T4
    technical characteristics
    settling time (on bias voltage ± 1%)≤ 2 s
    Discharging charging time constant≥ 0.3 s
    power18 … 28 V DC
    Constant power supply2 … 20 mA
    output impedance< 150 Ω
    Bias voltage8 … 12 V DC
    spectral noise (10 Hz)8 µg / √ Hz78.5 (µm / s ²) / √ Hz [2]
    Spectral noise (100 Hz)5 µg / √ Hz49,1 (µm / s ²) / √ Hz[2]
    spectral noise (1,000 Hz)4 µg / √ Hz39.2 (µm / s ²) / √ Hz[2]
    Electrical insulation (housing)≥ 100 MΩ
    physical properties
    size - Allen9/16 in14 mm
    Size - height1.0 in25.4 mm
    dimensions (without cable)1.1 oz31 grams[4]
    mountingMounting bolts
    mounting thread1/2 "-20 threaded[5]
    Assembly torque (mounting bolts)7 … 8 ft-lb"9.5 … 10.8 Nm[7] [8]
    Assembly torque (hex nut)2 … 5 ft-lb2.7 … 6.8 Nm
    sensor elementCeramic
    Geometry of the sensor elementshear principle
    housing materialstainless steel
    Sealinghermetically sealed welded
    electrical connectionintegrated armoured cable
    Cable exitside
    cable length10 ft3.0 m
    cable typepolyurethane[6]
    Instructions
    [1]conversion factor 1 g = 9.81 m/s²
    [2]typically
    [3] Zero-balance just, determined using the method of least squares
    [4]with mounting bolt
    [5]no equivalent in SI
    [6]two-core cable with stainless steel reinforcement
    [7]Assembly requires Allen key 1/8 "(for z Oil leagues mounting bolts) or 3 mm (for metric mounting bolts).
    [8]of the mounting bolts must be tightened with a higher torque than the hex nut, so the sensor easilycan again be removed.
    [9]details: see PCBs Declaration of conformance PS023 and PS060
    Accessories
    080A156mounting bolts 1/2 "-20 1/4" 28-1
    ICS-2single point calibration at 100 Hz (traceable to NIST)-1
    (M) metric mounting
    equipment
    M080A159Amounting bolts 1/2 "20 M6 x 1-1

    17 other articles of the same category: