PCB-EX(M)607A01

PCB-EX(M)607A01

  • Industrial ICP® vibration sensor,
  • With ATEX / CSA approval,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.5 … 10,000 Hz,
  • One-point calibration at 100 Hz,
  • 2-pin connector side, freely adjustable
  • basic data
    sensitivity (±15%)100 mV/g10.2 mV/(m/s²)[1]
    measuring range±50 g±490 m / s²
    Frequency range (± 3 dB)30 … 600,000 cpm0.5 … 10,000 Hz
    resonance frequency1,080 kcpm18,000 Hz[2]
    Wide band resolution350 µg3.434 µm / s ²[2]
    linearity≤1%[3]
    Lateral acceleration sensitivity≤ 7%
    Conditions of use
    Overload limit (shock)5,000 g pk49,050 m/s² pk
    Temperature range-65 … 250 ° F-54 … 121 ° C
    protection classIP68
    approval for potentially explosive atmospheresExIA IIC T4, AExia IIC, T4
    approval for potentially explosive atmosphere & embellishment; renEEx nL IIC T4,-40 ° C ≤ Ta ≤ 121 ° C, II 1 G
    approval for use in potentially explosive atmospheresCL I, div I, groups A, B, C, D CL
    II, div I, groups E, F, G Cl
    III , Div I
    approval for use in potentially explosive atmospheresCL I, div 2, groups A, B, C, D
    ExnL IIC T4, AExnA IIC T4
    admission f for potentially explosive atmospheresEEx nL IIC T4,-40 ° C ≤ Ta ≤ 121 ° C, II 3 G
    technical characteristics
    settling time (on bias voltage ± 1%)≤ 2.0 s
    discharging charging time constant≥ 0.3 s
    power18 … 28 V DC
    Constant power supply2 … 20 mA
    output impedance< 150 Ω
    Bias voltage8 … 12 V DC
    spectral noise (10 Hz)8 µg / √ Hz78.5 (µm / s &) sup2;)/ √ Hz[2]
    spectral noise (100 Hz)5 µg / √ Hz49,1 (µm / s ²) / √ Hz[2]
    spectral noise (1,000 Hz)4 µg / √ Hz39.2 (µm / s ²) / √ Hz[2]
    electrical insulation (housing)≥ 100 MΩ
    physical properties
    Size - hex7/8 in22 mm
    size - height1.23 in31.2 mm
    mass3.7 oz 105 grams
    fixingmounting bolt
    mounting thread¾-16 female thread[4]
    Mounting torque (mounting bolts)7 … 8 ft-lb9.5 … 10.8 Nm[5] [6]
    Assembly torque (hex nut)2 … 5 ft-lb2.7 … 6.8 Nm
    sensor elementceramic
    Geometry of the sensor elementshear principle
    housing materialstainless steel
    Sealinghermetically sealed welded
    electrical connection2-pin connector (MIL-C-5015)
    Connection positionside
    notes
    [1]conversion factor 1 g = 9.81 m/s²
    [2] Typically
    [3]zero-based balancing line, determined using the method of least squares
    [4]no equivalent in SI
    [5]Assembly requires Allen key 1/8 "(for inch mounting bolts) or 3 mm (for metric mounting bolts).
    [6]of the mounting bolts must be tightened with a higher torque than the hex nut, so that the sensor can easily be removed.
    [7]details: see PCBs Declaration of conformance PS023 and PS060
    Accessories
    080A162mounting bolts¾-16 on 1/4"-28-1
    ICS-2single point calibration at 100 Hz (traceable to NIST)-1
    (M) metric mounting
    " Accessories
    M080A163mounting bolts M6 x ¾-16 1-1

    17 other articles of the same category: