PCB-EX(M)603C01

PCB-EX(M)603C01

  • Industrial ICP® vibration sensor,
  • With ATEX / CSA approval,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.5 … 10,000 Hz,
  • One-point calibration at 100 Hz,
  • 2-pin female connector above
  • "
    basic data
    sensitivity (±10%)100 mV/g10.2 mV/(m/s²)[4]
    measuring range±50 g±490 m / s²
    Frequency range (± 3 dB)30 … 600,000 cpm0.5 … 10,000 Hz[5]
    resonance frequency1,500 kcpm25,000 Hz[1]
    Wide band resolution350 µg3.434 µm / s ²[1]
    linearity≤1%[2]
    Transverse acceleration sensitivity≤ 7%
    conditions of use
    Overload limit (shock)5,000 g pk49,050 m/s² pk
    temperature range-65 … 250 ° F-54 … 121 ° C
    Type of protectionIP68
    Approval for use in potentially explosive atmospheresCL I, div 2, groups A, B, C, D
    ExnL IIC T4, AExnA IIC T4
    approval for potentially explosive atmospheresAtmospheresEEx nL IIC T4,-40 ° C ≤ Ta ≤ 121 ° C, II 1 G
    approval for use in potentially explosive atmospheresCL I, div I, groups A, B, C, D CL
    II, div I, groups E, F, G CL
    III, div I
    Approval for use in potentially explosive atmospheresExIA IIC T4, AExia IIC, T4
    approved for explosive atmosphere erasEEx nL IIC T4,-40 ° C ≤ Ta ≤ 121 ° C, II 3 G
    technical
    settling time (on bias voltage ± 1%)≤ 2.0 s
    Discharging charging time constant≥ 0.3 s
    power18 … 28 V DC
    Constant power supply2 … 20 mA
    output impedance< 150 Ω
    Bias voltage8 … 12 V DC
    spectral noise (10 Hz)8 µg / √ Hz78.5 (µm / s ²) / √ Hz[1]
    Spectral noise (100 Hz)5 µg / √ Hz49,1 (µm / s ²) / √ Hz[1]
    spectral noise (1,000 Hz)4 µg / √ Hz39.2 ( µm / s ²) / √ Hz[1]
    electrical insulation (housing)≥ 100 MΩ
    physical properties
    size -. Allen11/16 in18 mm
    size - height1.65 in42.2 mm
    size1.8 oz51 grams
    Mounting thread1/4 "-28 threadedNo metric equivalent[3]
    Assembly torque2 … 5 ft-lb2.7 … 6.8 Nm
    Sensor elementceramic
    geometry of the sensor elementshear principle
    housing materialStainless steel
    Sealinghermetically sealed welded
    electrical connection2-pin connector (MIL-C-5015)
    Connection positionabove
    notes
    [1]typically
    [2]zero-based balancing line,. determined with the method of least squares
    [3]no equivalent in SI units
    [4]conversion factor 1 g = 9.81 m/s²
    [5]upper cut-off frequency tolerance: ±10%
    [6]details: see PCBs Declaration of conformance PS023 and < a href = ""... "/ produkte_skript/downloads/ce/ps060.pdf" "class ="blue"> PS060
    equipment
    081A40mounting bolts with 1/4"-28 thread-1
    ICS-2single point calibration at 100 Hz (traceable to NIST)-1
    (M) metric mounting
    equipment
    M081A61metric mounting bolts with M6 thread-1

    17 other articles of the same category: