PCB-(M)261A02
    zoom_out_map

      PCB-(M)261A02

    • Triaxial ICP® power measurement element
    • Measuring range (Z axis) 4.45 kN,
    • Measuring range (X - and Y-axes) 4.45 kN,
    • Sensitivity (Z-axis) 0.56 mV / N,
    • Sensitivity (X - and Y-axes) 1.12 mV / N,
    • Frequency range (Z axis) 0.01 … 10,000 Hz,
    • Frequency range (X - and Y-axes) 0.001 … 10,000 Hz,
    • 4-pin female connector on the side
    • of

      basic data
      sensitivity (Z axis) (±20%)2.5 mV / Nlb/0.56 mV / N[2]
       
      sensitivity (X - and Y-axes) (±20%)5 mV / lb1.12 mV/N[2]
       
      measuring range (Z axis)1,000 lb4.45 kN 
       
      measuring range (X - and Y-axes)1,000 lb4.45 kN 
       
      Maximum power (Z axis)1,320 lb5.87 kN 
       
      maximum force (X - and Y-axes)1,000 lb4.45 kN 
       
      maximum moment (Z axis)40 ft-lb54,23 Nm 
       
      maximum moment (X - and Y-axes)70 ft-lb94,91 Nm 
       
      wide band resolution (X - and Y-axes)0.006 lb RMS0.027 N RMS[1]
       
      Wide band resolution (X - and Y-axes)0.006 lb RMS0.027 N RMS[1]
       
      Upper cut-off frequency10,000 Hz  
       
      lower limiting frequency(Z axis) (-5%)0.01 Hz  
       
      Lower limiting frequency (X - and Y-axes) (-5%)0.001 Hz  
       
      linearity≤ 1% FS [3]
       
      Crosstalk (between X - and Y-axis)±3%  
       
      crosstalk (between X and y axis and Z axis)≤5%  
      Conditions of use
      temperature range-65 … 250 ° F-54 … 121 ° C 
      technical characteristics
      maximum output signal (Z axis)± 2.5 V DC  
       
      maximum output signal (X - and Y-axes)±5 V DC  
       
      Discharging charging time constant (Z axis)≥ 50 s  
       
      discharging charging time constant (X - and Y-axes)≥ 500 s  
       
      Supply voltage (all axes)20 … 30 V DC  
       
      constant power supply (all axes)2 … 20 mA  
       
      Output impedance≤100 Ω  
       
      Bias voltage8 … 14 V DC  
       
      Output polaritypositive  
      physical properties
      stiffness (Z axis)19 lb/µin3.3 kN/µm[1]
       
      Rigidity (X - and Y-axes)6 lb/µin1 kN/µm[1]
       
      mass34.40 oz975 grams 
       
      go äusematerialstainless steel  
       
      sealinghermetically sealed  
       
      electrical connection4-Pin  
       
      Connection positionside  
      notes
      [1]typically  
       
      [2]when using the recommended preload. The sensitivities can depending on the preload to ±5% change.  
       
      [3]zero-based balancing line, determined using the method of least squares  
       
      [4]Details: see PCBs Declaration of conformance PS023  
      (W) waterproof cable connection
      Cable outletOn the side  
      PCB-(M)261A02

      Specific References

      Download

      261A02_drawing.PDF

      Technical drawing

      Download (101.8k)

      261A02_manual.PDF

      Operating instructions

      Download (385.59k)

      261A02_specs.PDF

      Technical data sheet

      Download (75.47k)