ATEX sensors

For use in potentially explosive atmospheres, for example in chemical plants, the use of sensors with ATEX approval is mandatory. The sensors presented here are approved for use in EX zones in the European Union.
Most models may also be used in the US, Canada and Russia.

ATEX sensors  There are 18 items.

per page
Show 1 - 6 of 18 articles
  • Industrial ICP® vibration sensor, With ATEX / CSA approval, With through hole, Measurement range 50 g, Sensitivity 100 mV/g, Frequency range 0.5 … 8,000 Hz, One-point calibration at 100 Hz, 2-pin female connector on the side Industrial ICP® vibration sensor, With ATEX / CSA approval, With through hole, Measurement range 50 g, Sensitivity 100 mV/g, Frequency range 0.5 … 8,000 Hz, One-point calibration at 100 Hz, 2-pin female connector on the side

  • Industrial ICP® vibration sensor, With ATEX / CSA approval, Measurement range 50 g, Sensitivity 100 mV/g, Frequency range 0.5 … 10,000 Hz, One-point calibration at 100 Hz, 2-pin female connector above Industrial ICP® vibration sensor, With ATEX / CSA approval, Measurement range 50 g, Sensitivity 100 mV/g, Frequency range 0.5 … 10,000 Hz, One-point calibration at 100 Hz, 2-pin female connector above

  • Industrial ICP® vibration sensor, With ATEX / CSA approval, Measurement range 50 g, Sensitivity 100 mV/g, Frequency range 0.5 … 10,000 Hz, One-point calibration at 100 Hz, 2-pin connector side, freely adjustable Industrial ICP® vibration sensor, With ATEX / CSA approval, Measurement range 50 g, Sensitivity 100 mV/g, Frequency range 0.5 … 10,000 Hz, One-point calibration at 100 Hz, 2-pin connector side, freely adjustable

  • Industrial ICP® vibration sensor, With ATEX / CSA approval, Measurement range 50 g, Sensitivity 100 mV/g, Frequency range 0.5 … 10,000 Hz, One-point calibration at 100 Hz, Free ausrichtbares integrated cable, length 3 m, ending on cut end Industrial ICP® vibration sensor, With ATEX / CSA approval, Measurement range 50 g, Sensitivity 100 mV/g, Frequency range 0.5 … 10,000 Hz, One-point calibration at 100 Hz, Free ausrichtbares integrated cable, length 3 m, ending on cut end

  • Industrial ICP® vibration sensor, With ATEX / CSA approval, Measurement range 50 g, Sensitivity 100 mV/g, Frequency range 0.5 … 10,000 Hz, One-point calibration at 100 Hz, Free ausrichtbares integrated connecting cable with reinforcement, length 3 m, ending on cut end Industrial ICP® vibration sensor, With ATEX / CSA approval, Measurement range 50 g, Sensitivity 100 mV/g, Frequency range 0.5 … 10,000 Hz, One-point calibration at 100 Hz, Free ausrichtbares integrated connecting cable with reinforcement, length 3 m, ending on cut end

  • Industrial ICP® vibration sensor, With ATEX / CSA approval, Measurement range 50 g, Sensitivity 100 mV/g, Frequency range 0.5 … 10,000 Hz, One-point calibration at 100 Hz, Integrated cable, length 3 m, ending on cut end Industrial ICP® vibration sensor, With ATEX / CSA approval, Measurement range 50 g, Sensitivity 100 mV/g, Frequency range 0.5 … 10,000 Hz, One-point calibration at 100 Hz, Integrated cable, length 3 m, ending on cut end

Show 1 - 6 of 18 articles