High sensitivity

High sensitivity vibration sensors allow the measurement of small acceleration amplitudes. By using these sensors, for example, slowly rotating machines can be monitored or seismic measurements can be made in an industrial environment.

High sensitivity  There are 16 items.

per page
Show 1 - 6 of 16 articles
  • Industrial ICP® vibration sensor, Measuring range 10 g, Sensitivity500 mV / g, Frequency range 0.17 … 10,000 Hz, One-point calibration at 100 Hz, 2-pin female connector above Industrial ICP® vibration sensor, Measuring range 10 g, Sensitivity500 mV / g, Frequency range 0.17 … 10,000 Hz, One-point calibration at 100 Hz, 2-pin female connector above

  • Industrial ICP® vibration sensor, Measuring range 10 g, Sensitivity500 mV / g, Frequency range 0.17 … 10,000 Hz, One-point calibration at 100 Hz, Integrated armored cable, length 3 m, ending on cut end Industrial ICP® vibration sensor, Measuring range 10 g, Sensitivity500 mV / g, Frequency range 0.17 … 10,000 Hz, One-point calibration at 100 Hz, Integrated armored cable, length 3 m, ending on cut end

  • Industrial ICP® vibration sensor, With through hole, Measuring range 10 g, Sensitivity500 mV / g, Frequency range 0.5 … 3,000 Hz, One-point calibration at 100 Hz, 2-pin female connector on the side Industrial ICP® vibration sensor, With through hole, Measuring range 10 g, Sensitivity500 mV / g, Frequency range 0.5 … 3,000 Hz, One-point calibration at 100 Hz, 2-pin female connector on the side

  • Industrial ICP® vibration sensor, With through hole, Measuring range 10 g, Sensitivity500 mV / g, Frequency range 0.5 … 3,000 Hz, One-point calibration at 100 Hz, Integrated cable, length 3 m, ending on cut end Industrial ICP® vibration sensor, With through hole, Measuring range 10 g, Sensitivity500 mV / g, Frequency range 0.5 … 3,000 Hz, One-point calibration at 100 Hz, Integrated cable, length 3 m, ending on cut end

  • Industrial ICP® vibration sensor, Measuring range 10 g, Sensitivity500 mV / g, Frequency range 0.5 … 3,000 Hz, One-point calibration at 100 Hz, 2-pin female connector above Industrial ICP® vibration sensor, Measuring range 10 g, Sensitivity500 mV / g, Frequency range 0.5 … 3,000 Hz, One-point calibration at 100 Hz, 2-pin female connector above

  • Industrial ICP® vibration sensor, Measuring range 10 g, Sensitivity500 mV / g, Frequency range 0.5 … 3,000 Hz, One-point calibration at 100 Hz, Integrated armored cable, length 3 m, ending on cut end Industrial ICP® vibration sensor, Measuring range 10 g, Sensitivity500 mV / g, Frequency range 0.5 … 3,000 Hz, One-point calibration at 100 Hz, Integrated armored cable, length 3 m, ending on cut end

Show 1 - 6 of 16 articles