Multiple-axis sensors

Using bi- or triaxial accelerometers, measurements can be performed in two or three spatial axes at one point. Biaxial sensors are mainly used to monitor bearings. The central through hole allows the cable to be aligned at any angle.

Multiple-axis sensors  There are 16 items.

per page
Show 1 - 6 of 16 articles
  • Triaxial industrial ICP® vibration sensor, With through hole, Measurement range 50 g, Sensitivity 100 mV/g, Frequency range 0.5 … 5,000 Hz, One-point calibration at 100 Hz, 4-pin bayonet connector on the side Triaxial industrial ICP® vibration sensor, With through hole, Measurement range 50 g, Sensitivity 100 mV/g, Frequency range 0.5 … 5,000 Hz, One-point calibration at 100 Hz, 4-pin bayonet connector on the side

  • Triaxial industrial ICP® vibration sensor, With through hole, Measurement range 50 g, Sensitivity 100 mV/g, Frequency range 0.5 … 5,000 Hz, One-point calibration at 100 Hz, Integrated armored cable, length 3 m, ending on cut end Triaxial industrial ICP® vibration sensor, With through hole, Measurement range 50 g, Sensitivity 100 mV/g, Frequency range 0.5 … 5,000 Hz, One-point calibration at 100 Hz, Integrated armored cable, length 3 m, ending on cut end

  • Biaxialer industrial ICP® vibration sensor, With through hole, Measurement range 50 g, Sensitivity 100 mV/g, Frequency range 0.5 … 5,000 Hz, One-point calibration at 100 Hz, 3-pin female connector on the side Biaxialer industrial ICP® vibration sensor, With through hole, Measurement range 50 g, Sensitivity 100 mV/g, Frequency range 0.5 … 5,000 Hz, One-point calibration at 100 Hz, 3-pin female connector on the side

  • Biaxialer industrial ICP® vibration sensor, With through hole, Measuring range 10 g, Sensitivity500 mV / g, Frequency range 0.5 … 3,000 Hz, One-point calibration at 100 Hz, 3-pin female connector on the side Biaxialer industrial ICP® vibration sensor, With through hole, Measuring range 10 g, Sensitivity500 mV / g, Frequency range 0.5 … 3,000 Hz, One-point calibration at 100 Hz, 3-pin female connector on the side

  • Biaxialer industrial ICP® vibration sensor, With through hole, Measurement range 50 g, Sensitivity 100 mV/g, Frequency range 0.5 … 5,000 Hz, One-point calibration at 100 Hz, Integrated cable, length 3 m, ending on cut end Biaxialer industrial ICP® vibration sensor, With through hole, Measurement range 50 g, Sensitivity 100 mV/g, Frequency range 0.5 … 5,000 Hz, One-point calibration at 100 Hz, Integrated cable, length 3 m, ending on cut end

  • Biaxialer industrial ICP® vibration sensor, With through hole, Measurement range 50 g, Sensitivity 100 mV/g, Frequency range 0.5 … 5,000 Hz, One-point calibration at 100 Hz, Integrated armored cable, length 3 m, ending on cut end Biaxialer industrial ICP® vibration sensor, With through hole, Measurement range 50 g, Sensitivity 100 mV/g, Frequency range 0.5 … 5,000 Hz, One-point calibration at 100 Hz, Integrated armored cable, length 3 m, ending on cut end

Show 1 - 6 of 16 articles