PCB-483C15

PCB-483C15

  • 8-channel supply unit,
  • Inputs: ICP® and voltage,
  • Amplification factors 1 x, 10 x and 100 x,
  • BNC-inputs and outputs

basic data
number of channels8th
sensor typesICP, voltage[3]
Output range (maximum)± 10 V
Lower limit frequency (-5%)0.05 Hz[1]
Upper cut-off frequency (-3 dB)50,000 Hz
Upper limit frequency (-5%)> 17,000 Hz
Phase shift (at 1,000 Hz)± 1 °
Crosstalk (maximum)-72 dB
Display bias voltage / error (LEDs)Open circuit / short circuit / overload
Operating conditions
The temperature range (operation)32 ... 122 ° F0 ... 50 ° C
Technical characteristics
power supplymains voltage
Voltage (47 ... 63 Hz)100 ... 240 V AC
current consumptionA ?0,7
Supply voltage (for Sensor) (± 1 V DC )26 V DC
Constant current supply (for Sensor)0 ... 20 mA[2]
Override threshold (± 1.0 V pk)± 10/5 V pk[3]
DC offset<20 mV
output impedance50 ?
Broadband noise (1x amplification factor) (1 ... 10,000 Hz)5.6 uV rms[4]
Spectral Noise (1 Hz)0.67 uV / Hz[4]
Spectral noise (10 Hz)0.10 uV / Hz[4]
Spectral noise (100 Hz)0.06 µV/ ?Hz[4]
Spectral noise (1,000 Hz)0.06 µV/ ?Hz[4]
Spectral noise (10,000 Hz)0.05 µV/ ?Hz[4]
Broadband noise (amplification factor 10x) (1 ... 10,000 Hz)21 µV/ rms[4]
Spectral Noise (1 Hz)5.10 uV / Hz[4]
Spectral noise (10 Hz)0.60 uV / Hz[4]
Spectral noise (100 Hz)0.22 uV / Hz[4]
Spectral noise (1,000 Hz)0.22 uV / Hz[4]
Spectral noise (10,000 Hz)0.19 uV / Hz[4]
Broadband noise (gain 100x) (1 ... 10000 Hz)165 µV/ rms[4]
Spectral Noise (1 Hz)57 µV/ ?Hz[4]
Spectral noise (10 Hz)5.2 µV/ ?Hz[4]
Spectral noise (100 Hz)1.7 uV / Hz[4]
Spectral noise (1,000 Hz)1.8 uV / Hz[4]
Spectral noise (10,000 Hz)1.4 µV/ ?Hz[4]
physical properties
Electrical connection (ICP® sensor input)BNC connector
Electrical connection (output)BNC connector
Electrical connection (mains voltage)IEC 320
Size - Height (nominal)1.75 in44.5 mm
Size - Width (nominal)19 in482.6 mm
Size - depth (nominal)13.7 in348 mm
Dimensions6.25 lb2.83 kg
Hints
[1]Tolerance of the lower limit frequency: ± 25%
[2]Configurable via two potentiometers for every four channels Default setting: 4 mA (± 0.5 mA)
[3]Adjustable via internal jumpers
[4]typically,
[5]Details: see PCB Declaration of Conformance PS024
included supply
017AXXpower cable-1

6 other articles of the same category: