Calibration equipment

Calibration equipment

Hand calibrators allow on-site rapid function testing of the accelerometer and the subsequent measuring chain. The reference signal is a sine wave excitation at a frequency of 159 Hz at 1 g, optionally RMS or peak. For typical accelerometers the PCB-394C06 model is the right choice, for seismic or industrial transducers weighing up to 250 grams, the PCB-699A02 is available.
A complete on-site calibration of accelerometers is provided by the portable, battery-powered TMS-9110D calibration system. It checks the frequency response of the sensors in the range of 7 Hz to 10 kHz and generates traceable calibration certificates. The TMS-9100D model is available as a low-priced alternative with reduced functionality.

Showing 1-6 of 6 item(s)
Showing 1-6 of 6 item(s)

Active filters

Portable vibration calibrator (model 9110D)

  • Portable system for calibration of vibration sensors
  • Frequency range 5 ... 10,000 Hz
  • adjustable amplitude
  • LCD display in SI or US units
  • Battery operation up to 18 hours
  • Integrated ICP® supply and bias voltage display
  • Signal input jack and output jack for reference signal
  • Incl. Data storage and USB port for data export

    Calibration system model TMS-K9145D10

    • Automated calibration system
    • Calibration of the ICP® / IEPE-, cargo and MEMS acceleration sensors,
    • Traceable calibrations,
    • Calibration system with calibration certificate according to ISO 17025,
    • Entry level solution to build of a calibration laboratory,

      PCB-699A02

      • Battery-powered vibration thrusters,
      • 1 g at 159.2 Hz,
      • Max Sensormasse 250 grams.
      • Including calibration certificate

        PCB-301A10

      • ICP® calibration reference vibration sensor,
      • Measurement range 50 g,
      • Sensitivity 100 mV/g,
      • Frequency range: 0.5 … 10,000 Hz,
      • 1/4 "-28 internal thread above,
      • 1/4 "-28 internal thread below,
      • 10-32 female connector on the side
        • PCB-301A11

        • ICP® calibration reference vibration sensor,
        • Measurement range 50 g,
        • Sensitivity 100 mV/g,
        • ,
        • frequency range: 0.5 … 10,000 Hz,
        • 10-32-female thread above,
        • 1/4 "-28 internal thread below,
        • 10-32 socket on the side"
          • PCB-394C06

          • Battery-powered vibration thrusters,
          • 1 g at 159.2 Hz,
          • Max Sensormasse 210 grams.
          • Including calibration certificate