Calibration equipment

Hand calibrators allow on-site rapid function testing of the accelerometer and the subsequent measuring chain. The reference signal is a sine wave excitation at a frequency of 159 Hz at 1 g, optionally RMS or peak. For typical accelerometers the PCB-394C06 model is the right choice, for seismic or industrial transducers weighing up to 250 grams,...

Hand calibrators allow on-site rapid function testing of the accelerometer and the subsequent measuring chain. The reference signal is a sine wave excitation at a frequency of 159 Hz at 1 g, optionally RMS or peak. For typical accelerometers the PCB-394C06 model is the right choice, for seismic or industrial transducers weighing up to 250 grams, the PCB-699A02 is available.
A complete on-site calibration of accelerometers is provided by the portable, battery-powered TMS-9110D calibration system. It checks the frequency response of the sensors in the range of 7 Hz to 10 kHz and generates traceable calibration certificates. The TMS-9100D model is available as a low-priced alternative with reduced functionality.

More

Calibration equipment  There are 6 items.

Show 1 - 6 of 6 articles
  • ICP® calibration reference vibration sensor, Measurement range 50 g, Sensitivity 100 mV/g, Frequency range: 0.5 … 10,000 Hz, 1/4 "-28 internal thread above,1/4 "-28 internal thread below,10-32 female connector on the side ICP® calibration reference vibration sensor, Measurement range 50 g, Sensitivity 100 mV/g, Frequency range: 0.5 … 10,000 Hz, 1/4 "-28 internal thread above,1/4 "-28 internal thread below,10-32 female connector on the side

  • ICP® calibration reference vibration sensor, Measurement range 50 g, Sensitivity 100 mV/g,, frequency range: 0.5 … 10,000 Hz, 10-32-female thread above, 1/4 "-28 internal thread below, 10-32 socket on the side" ICP® calibration reference vibration sensor, Measurement range 50 g, Sensitivity 100 mV/g,, frequency range: 0.5 … 10,000 Hz, 10-32-female thread above, 1/4 "-28 internal thread below, 10-32 socket on the side"

  • Battery-powered vibration thrusters, 1 g at 159.2 Hz, Max Sensormasse 210 grams. Including calibration certificate Battery-powered vibration thrusters, 1 g at 159.2 Hz, Max Sensormasse 210 grams. Including calibration certificate

  • Battery-powered vibration thrusters, 1 g at 159.2 Hz, Max Sensormasse 250 grams. Including calibration certificate Battery-powered vibration thrusters, 1 g at 159.2 Hz, Max Sensormasse 250 grams. Including calibration certificate

  • Calibration of acceleration, vibration velocity and displacement sensors Calibration certificate according to ISO 17025, ICP® / IEPE sensor supply, Calibrations according to ISO 16063-21, For sensors up to 800 grams, Vibration velocity of max. 380 mm / s, Vibration acceleration of max. 20 g, Deflection max ± 0.6 mm 7 Hz frequency range...≥ 10 Hz, built-in memory, USB... Calibration of acceleration, vibration velocity and displacement sensors Calibration certificate according to ISO 17025, ICP® / IEPE sensor supply, Calibrations according to ISO 16063-21, For sensors up to 800 grams, Vibration velocity of max. 380 mm / s, Vibration acceleration of max. 20 g, Deflection max ± 0.6 mm 7 Hz frequency range...≥ 10 Hz, built-in memory, USB...

  • Automated calibration system Calibration of the ICP® / IEPE-, cargo and MEMS acceleration sensors, Traceable calibrations, Calibration system with calibration certificate according to ISO 17025, Entry level solution to build of a calibration laboratory, Automated calibration system Calibration of the ICP® / IEPE-, cargo and MEMS acceleration sensors, Traceable calibrations, Calibration system with calibration certificate according to ISO 17025, Entry level solution to build of a calibration laboratory,

Show 1 - 6 of 6 articles