Seismic sensors

Seismic sensors

Seismic acceleration sensors are used where low-frequency vibrations with very low amplitudes have to be detected. Typical applications include the detection of building, tower or bridge vibrations or the detection of seismic signals caused by earthquakes or blasts. The typical frequency band of the seismic sensors is between 0.02 and 2,000 Hz. The high sensitivities are between 1,000 and 10,000 mV / g.

Showing 1-7 of 7 item(s)
Showing 1-7 of 7 item(s)

Active filters

PCB-393A03

  • ICP® vibration sensor for seismic measurements,
  • Measuring range 5 g,
  • Sensitivity 1,000 mV / g,
  • Frequency range 0.5 … 2,000 Hz,
  • Wide band resolution 0.00001 g RMS,
  • 2-pin female connector above
    • PCB-393B04

    • ICP® vibration sensor for seismic measurements,
    • Measuring range 5 g,
    • Sensitivity 1,000 mV / g,
    • Frequency range 0.06 … 450 Hz,
    • Wide band resolution 0.000003 g RMS,
    • 10-32 female connector above
      • PCB-393B05

      • ICP® vibration sensor for seismic measurements,
      • Measuring range 0.5 g,
      • Sensitivity 10,000 mV / g,
      • Frequency range 0.6 … 450 Hz,
      • Wide band resolution 0.000004 g RMS,
      • 10-32 female connector above
        • PCB-393B12

        • ICP® vibration sensor for seismic measurements,
        • Measuring range 0.5 g,
        • Sensitivity 10,000 mV / g,
        • Frequency range 0,15 … 1000 Hz,
        • Wide band resolution 0.000008 g RMS,
        • 2-pin female connector above
          • PCB-393B31

          • ICP® vibration sensor for seismic measurements,
          • Measuring range 0.5 g,
          • Sensitivity 10,000 mV / g,
          • Frequency range 0.1 …?200 ?z,
          • Wide band resolution 0.000001 g RMS,
          • 2-pin female connector above
            • PCB-393B32

            • ICP® vibration sensor for seismic measurements,
            • Measurement range 1 g,
            • Sensitivity 5,000 mV / g,
            • Frequency range 0.2 …?200 ?z,
            • Wide band resolution 0.000002 g RMS,
            • 2-pin female connector above
              • PCB-393C

              • ICP® vibration sensor for seismic measurements,
              • Measuring range 2.5 g,
              • Sensitivity 1,000 mV / g,
              • Frequency range 0.025 … 800 Hz,
              • Wide band resolution 0.0001 g RMS,
              • 10-32 female connector on the side