PCB-426E01
basic data | |||
Nominal diameter of microphone | 1/2 " | ||
gain | -0.05 dB | [1] [2] | |
Frequency range (±0. 1 dB) (rel. 1,000 Hz) | 6.3 … 125,000 Hz | ||
Frequency range (-3 dB) (rel. 1,000 Hz) | < 0.9 Hz | ||
frequency range with phase deviation-1 … 1 ° | 32 … 20,000 Hz | [1] | |
frequency range with phase deviation-1 … 10 ° | 3.2 … 32 Hz | [1] | |
noise (A-weighted) | < 2.8 µV | [1] | |
noise (A-weighted) | 1.7 MV | [1] [2] | |
noise (unweighted, 20 … 20,000 Hz) | < 5 µV | [1] | |
Noise (unweighted, 20 … 20,000 Hz) | 3 µV | [1] [2] | |
distortion (input 3 V rms at 1,000 Hz) | ≤ 70 dB | [1] | |
Rate of change of the output | 2 V/µS | [2] | |
TEDS Chip | by defaultintegrated | [3] | |
conditions | |||
temperature range (operation) | -40 … 176 ° F | -40 … 80 ° C | |
temperature influence | < 0.05 dB | ||
air humidity (non-condensing) | 0 … 95% RH | ||
influence by humidity | < 0.05 dB | ||
Specifications | |||
power supply | 20 … 32 V DC | ||
Constant power supply | 2 … 20 mA | ||
impedance (input) | 20 G Ω | [2] | |
capacity (input) | 0.06 pF | [2] | |
Bias voltage | 10 … 14 V DC | ||
impedance (output) | < 50 Ω | ||
Output range (maximum) | ±7 V pk | ||
physical properties | |||
parts usematerial | stainless steel | ||
Size - diameter | 0.5 in | 12.7 mm | |
size - length | 3.18 in | 80.7 mm | |
mass | 1.35 oz | 38 g | |
Connector | BNC Jack | ||
thread for microphone | 0,4606 - 60 UNS | 11,7 mm - 60 UNS | |
Notes | |||
[1] | measured with a reference microphone with 18 pF | ||
[2] | typically | ||
[3] | TEDS memory in accordance with IEEE PP1451. 4 | ||
[4] | details: see PCBs Declaration of conformance PS064 | ||
supplied accessories ör | |||
ERC-16 | calibration of a microphone preamplifier | -1 |